WindowsXP/2000/NT4.0

This is a non-PostScript GDI Driver.

SP-300 Windows Driver doesn't support Windows NT.

STIKA Series

RWD-031 STIKA DRIVER for WindowsXP/2000/NT4.0 Ver.2.60
(d031260j.exe 276,992 bytes)

[Models]

SX-15/12/8
STX-7/8

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

Please use the original installer (setup.exe) for installation.

MODELA & MODELA Pro

RWD-030 2.5D DRIVER for WindowsXP/2000/NT4.0 Ver.3.30
(d030330j.exe 361,927 bytes)

[Models]

MDX-3/15/20/500/650(RML-1 & NC code)
EGX-20/30/300/400/600
PNC-2000/2100/2100A/2200/2200A/2300/2300A/2700E/2700M
PNC-300/300G/3000/3100/3100G/3200(RML-1 & NC code)
PNC-2500/2500G/2500R/2500H/2550/2550G/2550HG
CS-20

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

Command Mode has been changed to [mode1] from Ver.1.30. Please make sure to select [Auto] or [mode1] for the command mode on the CAMM-2/3.
However, it is not necessary for MDX-3/20/15/500(NC code) and PNC-3000/300G/3100G/3200(NC code)/2500G.
Please use the original installer (setup.exe) for installation.

METAZA

RWD-042 METAZA DRIVER for WindowsXP/2000 Ver.1.30
(d042130j.exe 232,231 bytes)

[models]

MPX-50, MPX-60

[OS]

WindowsXP,Windows2000

*Note*

1.Please use the METAZA Driver ver.1.00 and above with the Dr.METAZA ver.1.50 *and above.
(Dr.METAZA latest version is ver.1.60.)
"Image Inversion" function will not be able to use if it is used with the Dr.METAZA ver.1.4and below.
Download the updater from below if you need to update your Dr.METAZA.
2.Please use the original installer (setup.exe) for installation.
3.METAZA DRIVER for WindowsNT4.0 Ver.1.30 doesn't support MPX-60,
   because Windows NT doesn't support the USB port .

Dr.METAZA Updater for WindowsXP/2000/NT4.0( Updater for latest ver. 1.60)

[Contents]

This is the program for updating the Dr.METAZA ver.1.00~1.50 to ver.1.60
It is necessary to have the Dr.METAZA already installed in your computer.

<How to Update>
1.Extract the file downloaded by double-clicking.
2.Double-click the "Update"(updaterexe).
Follow the instruction shown on the screen.

<Contents of Update>
1.The problem that the text printing result is unattractive with the text mode when making the data with the photo mode has been fixed.

2.The problem that the text size changes when open the [Text Properties] and click [OK]
after changing the mode has been fixed.

ColorCAMM Series

RWD-038 PC-600 DRIVER for WindowsXP/2000/NT4.0 Ver.2.20
(d038220j.exe 157,994 bytes)

[Models]

PC-600

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

There could be limitation in print length in case of using it on WindowsXP.
This is a non-PostScript GDI Driver. It cannot be used with RolandCOLORCHOICE.

RWD-033 PC-60 DRIVER for WindowsXP/2000/NT4.0 Ver.2.00
(d033200j.exe 133,044 bytes)

[Models]

PC-60

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

There could be limitation in print length in case of using it on WindowsXP.

RWD-032 ColorCAMM DRIVER for WindowsXP/2000/NT4.0 Ver.2.10
(d032210j.exe 163,840 bytes)

[Models]

PC-50/PNC-5000

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

There could be limitation in print length in case of using it on WindowsXP.

CAMMJET Series

RWD-034 CAMMJET DRIVER for WindowsXP/2000NT4.0 Ver.2.00
(d034200j.exe 179,805 bytes)

[Models]

CJ-70/60

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

Vinyl Cutters

RWD-029 CAMM-1 DRIVER for WindowsXP/2000/NT4.0 Ver.2.70
(d029270.exe 317,952 bytes)

[Models]

CX-12/24/300/400/500
CM-12/24/300/400/500
PNC-900/950/910/960/1000/1000A/1050/1100
PNC-1200/1210/1410/1800/1850/1860
PNC-1600/1610/1900/1910

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

Please use the original installer (setup.exe) for installation.

Engraving & Milling Machines

RWD-030 2.5D DRIVER for WindowsXP/2000/NT4.0 Ver.3.30
(d030330j.exe 318,216 bytes)

[Models]

MDX-3/15/20/500/650(RML-1 & NC code)
EGX-20/30/300/400/600
PNC-2000/2100/2100A/2200/2200A/2300/2300A/2700E/2700M
PNC-300/300G/3000/3100/3100G/3200(RML-1 & NC code)
PNC-2500/2500G/2500R/2500H/2550/2550G/2550HG
CS-20

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

Command Mode has been changed to [mode1] from Ver.1.30. Please make sure to select [Auto] or [mode1] for the command mode on the CAMM-2/3.
However, it is not necessary for MDX-3/20/15/500(NC code) and PNC-3000/300G/3100G/3200(NC code)/2500G.
Please use the original installer (setup.exe) for installation.

Plotters

RWD-028 PLOTTER DRIVER for WindowsXP/2000/NT4.0 Ver.2.20
(d028220j.exe 393,216 bytes)

[Models]

DXY-880/980/885/990
DXY-1100/1200/1300/1150/1250/1350/1150A/1350A
DPX-2200/3300/2500/3500/2600/3600/4600/4600A
DPX-2700/3700/2700A/3700A/4700LS
GRX-300/400/300AR/400AR/300AG/400AG/310/410/350/450
GRX-3500/4500
GSX-3000/4000
RP-11/12/21/22

[OS]

WindowsXP, Windows2000 & WindowsNT4.0

*Note*

Please use the original installer (setup.exe) for installation.